Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread and 24 Degree Female Cone
The stainless steel fitting flange adapter with a 45 degree metric male thread and 24 degree female cones was made in accordance with SAE J514 and ISO 8434-2 standards. A complete set of Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread And 24 Degree Female Cones consists of a sleeve, nut, and body. They are sometimes known to as flared fittings because of the 37-degree flare of the seating surface. It is advised to use it in high-pressure applications.
Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread And 24 Degree Female Cone
The SAE J514 and ISO 8434-2 standards were followed in the production of the stainless steel fitting flange adapter with a 45 degree metric male thread and 24 degree female cones. A sleeve, nut, and body make up a whole set of Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread And 24 Degree Female Cones. Due to the seating surface's 37-degree flare, they are also referred to as flared fittings. The use of it in high-pressure applications is advised.
The installation of Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread And 24 Degree Female Cone
Step 1: Verify that the surface of the fitting and sealing is unharmed. Before installation, trim the tube to the required length and flare the end to a 37-degree angle.
Step 2: Lubricate the flare's surface and its threads.
Step 3: Connect the tube end with the nut and sleeve. After lining up the parts for hand tightening, crank the flare nut until the sealing surface is completely contacted.
Step 4: Verify the tightening torque value and confirm that the sealing is connected in accordance with industry standards.
The specification of Stainless Steel Fitting Flange Adapter - 45 Degree Metric Male Thread And 24 Degree Female Cone
Material
The fitting is made of stainless steel of the 316 grade, which has a higher resistance to corrosion and rust.
Temperature at Work
This fitting's operating temperature range, based on the SS316 material, is -60 °C to 200 °C.
Effort Pressure
The maximum operating pressure might go as high as 6200 PSI, depending on the kind and size of the fitting (430 Bars).
Uses
Aids in a 45-degree change in pipeline direction.
